A6 Quattro Sedan V6-3.2L (BKH) (2005)
Position bolts by hand and screw in a few turns. If threads are damaged, entire brake caliper must be replaced!
‹› Only insert connector by hand to avoid damaging it.
‹› Make sure that connectors on vehicle side and actuator side are free of dirt and damage.
-
Install connector.
-
Mounting wheels. Refer to => Wheels, Tires, Wheel Alignment 44 Removal and Installation
After replacing actuator, basic setting 10 must be performed with the vehicle diagnostic tester in the EPB function.
Use the vehicle diagnosis, testing and information system (VAS 5051B) or (VAS 5052).
-
then select basic section 10 under "Function". Refer to=> [ Vehicle Diagnostic, Testing and Information System, Connecting and
Selecting Function ] See: Antilock Brakes / Traction Control Systems/Testing and Inspection. or,
-
under chassis
-
Brake system
-
01- On Board Diagnostic (OBD) capable systems
-
53 - Parking brake
-
J540 - Electro-Mechanical Parking Brake Control Module
-
J540 - Basic setting (3 Electromechanical parking brake function test)