A6 Quattro Sedan V6-3.2L (BKH) (2005)
-
Remove sealing ring at pull tab -arrow A- from cap -1 -.
-
Insert new sealing ring -2- with semicircular profile in groove -arrow B- on cap.
-
The pull tab -arrow A- must face upward.
-
Smooth side of sealing ring -2- must face toward outside
O-ring, inserting in oil filter housing
-
Insert O-ring -2- in groove -arrow- on oil filter housing -1-.
Note: Observe waste disposal regulations!
-
Engage new oil filter insert in oil filter cover.
-
Install oil filter cover -3-.
-
Install coolant reservoir.
-
Remove noise insulation. See: Body and Frame/Sound Proofing / Insulation/Service and Repair/Removal and Replacement
-
Open oil drain plug on oil pan or extract engine oil.
-
Install oil drain plug.