A6 Quattro Sedan V6-3.2L (BKH) (2005)
Intake Manifold: Locations
Intake Manifold Upper-Part, Component Overview
Intake Manifold Upper-part, Component Overview
1. Intake Manifold Tuning (IMT) Valve Position Sensor G513
2. 2.5 Nm
3. 2.5 Nm
4. Actuator for intake manifold change-over
-
Installed location of tooth segments for variable intake manifold
-
As replacement part together with - 24 -
5. Seal
-
Replace if damaged
-
Lift out with screwdriver to replace
-
Press in by hand
6. Ball pin, 2.5 Nm
7. Intake manifold upper part
8. Throttle valve control module J338
9. 5 Nm
10. Wire harness retainer
11. Seal
-
Replace
12. Intake Manifold Runner Control (IMRC) Valve N316
13. 2.5 Nm
14. Intake Air Temperature (IAT) Sensor G42 / Manifold Absolute Pressure (MAP)
-
Sensor G71
15. O-ring
-
Replace
16. 2.5 Nm
17. Crankcase housing ventilation pressure regulator valve
18. O-ring