A6 Quattro Sedan V6-3.2L (BKH) (2005)
-
Hold the camshaft timing chain pretensioned by pressing on counter-holder in direction of - arrow -.
-
Simultaneously, pre-torque the camshaft bolt using the Multipoint Socket (T10035) and torque wrench.
‹› Tightening Specifications: 40 Nm.
-
Continue holding the pretension on the intake camshaft and pre-torque the bolt - 1 - on the exhaust camshaft.
‹› Tightening Specifications: 40 Nm.
-
Tighten camshaft bolts - 1 - and - 2 - on left cylinder head to final tightening specification.
‹› Tightening Specifications 80 Nm plus an additional 90° turn.
-
Set the Counter-Holder (T10172) with Pin (T10172/2) in place on the camshaft adjuster of the right exhaust camshaft.