audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Cabin Ventilation Duct|Testing and Inspection|Page 14868 > < Cabin Temperature Sensor / Switch|Service and Repair
Page 1
background image

Cabin Ventilation Duct: Testing and Inspection

Vent Frame, Checking

NOTE:

-

Fig. shows vent frames with rear bumper removed.

-

One vent frame - A - is installed on both left and right for forced air extraction.

-

Sealing lips - B - only close properly if vent frame - A - has been installed correctly.

-

To ensure proper functioning of passenger compartment ventilation, vent openings - B - in left and right luggage compartment lining are never to
be sealed off.

-

Space between wing and luggage compartment lining must not be obstructed to avoid impedance of air flow from vent openings - B - to vent
frames - A -.

-

On Sedan models, for example, air from passenger compartment flows via vent slits in rear shelf and through slits incorporated into upper lining
into luggage compartment.

-

Clogged ducts or gummed sealing lips could cause windows to mist up.

-

Check for blockage of air ducts from vent openings - B - on left and right to the two vent frames - A - in luggage compartment.

-

With rear bumper cover removed, check sealing lips - B - in vent frames - A - (must move freely and close automatically).

Cabin Ventilation Duct|Testing and Inspection|Page 14868 > < Cabin Temperature Sensor / Switch|Service and Repair