audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Instruments - Fuel Gauge Not Showing Full After Fill Up|Page 21716 > < Instruments - Fuel Gauge Not Showing Full After Fill Up|Page 21713
Page 1
background image

Fuel Gauge: Customer Interest
Instruments - Fuel Gauge Not Showing Full After Fill Up

90 Fuel Gauge Does Not Go To Full After Filling Up

90 09 01 

2011846/5 

January 21, 2009

Supersedes Technical Service Bulletin Group 90 number 08-14 dated November 6, 2008 for reasons listed below.

Vehicle Information

Condition

The fuel gauge needle is on "empty" or in "reserve" although the fuel tank has just been filled to capacity.

Technical Background

After filling the fuel tank to capacity, the fuel gauge needle can stay in the empty or reserve area and/or rise very slowly to full.

Production Solution

Improved instrument cluster software.

Service

SVM Update Instructions

1. Follow all instructions in the attached TSB 2011732 00 Software Version Management (SVM), operating instructions.

2. Update the instrument cluster (J285), address word 17, using the SVM action code as listed in the table if necessary.

Instruments - Fuel Gauge Not Showing Full After Fill Up|Page 21716 > < Instruments - Fuel Gauge Not Showing Full After Fill Up|Page 21713