A6 Quattro Sedan V6-3.2L (BKH) (2005)
18. Position the wiring from the suction jet pump to sender G 169 according to Figures 20-22.
19. Install suction jet pump with Sender G 169 and fuel pump with Sender G per repair manual.
20. Check the female connector of the body side harness with a Pin Drag" test to ensure the connection to the vehicle wiring harness is correct.
21. If both DTC 00771 and DTC 00438 were stored, check the ground wire at pin 3 of the T5a connector of the body harness. The voltage drop should
be less than .4 volts.
22. Clear the fault memory in the instrument cluster.
23. Recheck for proper operation.