A6 Quattro Sedan V6-3.2L (BKH) (2005)
Tire Pressure Sensor: Service and Repair
Metal Valve Body
Special tools, testers and auxiliary items required
‹› Torque Wrench (V.A.G 1410)
-
Place metal valve with rubber seal through rim from inside.
-
Position beveled washer and union nut from outside and tighten => [ (Item 7) Union nut ] See: Alignment/Service and Repair/Procedures/Wheel
Electronics Assembly Overview.
-
Secure against turning with counterhold - 1 - (e.g. drill bit dia. 2 mm).
-
Press wheel electronics - 1 - into bed and fasten at rear of valve with microencapsulated screw => [ (Item 6) Microencapsulated screws ] See:
Alignment/Service and Repair/Procedures/Wheel Electronics Assembly Overview.