A6 Quattro Sedan V6-3.2L (BKH) (2005)
/Page-3189001.png)
Fuel Rail: Procedures
Intake Manifold Lower-part With Fuel Rail, Removing And Installing
Special tools, testers and auxiliary items required
-
Socket 14 mm 3150
-
Torque Wrench 5-50Nm V.A.G 1331
-
Reversible Ratchet V.A.G 1331/1
-
Open end wrench socket 17 mm V.A.G 1331/2
-
Socket Insert Af14 V.A.G 1331/8
-
Socket T40055
Removing
NOTE: The following removal and installation procedure is for the left intake manifold lower part. The procedure for the other side is identical.
CAUTION: Fuel system is under high pressure. Before opening high pressure components of the Multiport Fuel Injection (MFI), pressure must
be relieved to residual pressure. Then wrap a clean rag around the connection and relieve residual pressure by carefully loosening the connection.
-
Remove upper part of intake manifold.
