A6 Quattro Sedan V6-3.2L (BKH) (2005)
/Page-2511002.png)
If the indications do not resemble description:
Checking internal resistance
-
Disconnect electrical harness connector - 1 - from the Engine Coolant Temperature (ECT) Sensor (G62).
-
Using a multimeter, check the Engine Coolant Temperature (ECT) Sensor (G62) for resistance between terminals - 1 -and - 2 -.
Specified value: 450 to 1000 ohms.
If specified value is not obtained:
-
Replace the the Engine Coolant Temperature (ECT) Sensor (G62) => Fuel Injection and Ignition 19 Removal and Installation.
If specified value is obtained:
Checking voltage
