A6 Quattro Sedan V6-3.2L (BKH) (2005)
Air Bag Safety Switch/Connector: Service and Repair
Power Front Memory Seats Overview
Power Front Memory Seats
‹› From 07.2006, the usual wiring harness routing to connector station under front seat => [ Connectors, Disconnecting ] has been replaced with
modular wiring routing => [ Modular Wiring Routing, from 07.2006, Assembly Overview ] See: Body and Frame/Seats/Service and
Repair/Removal and Replacement/Power Front Memory Seats Overview.
‹› The modular wiring routing has not been implemented for all countries.
‹› Check version of front seat and of vehicle and perform repairs accordingly.
‹› Note the two possible versions of the modular wiring routing, Modular Light or Modular => [ Modular Wiring Routing Versions ] See: Body and
Frame/Seats/Service and Repair/Removal and Replacement/Standard Front Seats Overview.
Airbag Adapter, Connecting
Special tools, testers and auxiliary items required
‹› Airbag adapter (VAS 6036)
‹› Vehicle Diagnosis, Testing and Information System (VAS 5051B)
‹› Before disconnecting ignition and ground wiring, technician must electrostatically discharge him/herself (touch door striker plate or pin briefly).
CAUTION!
The Airbag Adapter (VAS 6036) must stay connected to seat until seat is installed again.