A6 Quattro Sedan V6-3.2L (BKH) (2005)
-
Carefully loosen trim panel spring pins - 1 - from instrument panel using Trim Removal Wedge 3409.
NOTE: The instrument panel vent has a hole on both sides for attaching the hook 3438.
-
Carefully pull instrument panel vent out of installation opening on both sides using hook 3438.
If instrument panel vent cannot be removed, proceed as follows:
-
Position instrument panel vent blades so they are horizontal.
-
Release retaining clips -arrow- by inserting watchmaker screwdrivers - 2 - and - 3 -.
-
Pull instrument panel vent out of installation opening on both sides using hook 3438, thereby keeping watchmaker screwdrivers inserted.
-
Disconnect electrical connectors.
-
Unscrew light switch - 3 - in position "0".
-
Unfasten spreader pin - 2 - at air duct - 1 - and remove air duct.
-
Reaching through opening above instrument panel vent, grab light switch from side and push it out of instrument cluster - arrow -.
-
Disconnect electrical connector.
-
Press cover strip - 1 - on instrument cluster switch panel in - direction of arrow -.
-
Grab cover strip and pull off from switch.