A6 Quattro Sedan V6-3.2L (BKH) (2005)
-
Ensure anti-rotation protector - 5 - engages in door shell.
-
Press insulation onto door shell.
‹› For failure-free crash sensor function, you guarantee effective door seal after installation.
‹› Replace insulation if adhesive sealing material is damaged or dirty.
-
Switch on ignition.
CAUTION!
No one should be in vehicle when connecting battery.
-
Connect battery ground strap.
-
Follow measures after connecting battery.
‹› If the airbag malfunction indicator lamp (K75) indicates a malfunction after assembly, check the DTC memory with the vehicle diagnosis, testing
and information system (VAS 5051B), clear it, and check it again.
3
Retainer
4
Nuts (Qty. 2)
‹› Tightening specification 4 Nm
5
Anti-rotation protector
Disconnecting the connector on the crash sensor - version II
-
Pull the retainer - 4 - downward and out - arrow A -, press it down - arrow B - and disconnect the electrial connector - 5 - on the crash sensor - 3
-.
‹› Ignore - items 1 and 2 -.
Rear Side Curtain Airbag Crash Sensors