A6 Quattro Sedan V6-3.2L (BKH) (2005)
Distance Sensor: Removal and Replacement
ACC sensor, removing and installing
Sensor is located behind radar cover in front bumper.
Special tools, testers and auxiliary items required
^
Torque wrench V.A.G 1783
Removing
-
Remove front bumper cover.
-
Disconnect harness connector - arrow -.
-
Remove hex bolts - 1 -.
-
Remove ACC sensor.
Installing
Installation is in reverse order of removal. Note the following:
Note: Studs in bracket are preset. If necessary, correct adjustment.
-
Place sensor on a soft and clean surface.
Measure dimension - a - of all studs.
Dimension - a - must be
34 mm
.