A6 Quattro Sedan V6-3.2L (BKH) (2005)
Suspension Control Pressure Sensor/Switch: Service and Repair
Level Control Pump Temperature Sensor
Level Control Pump Temperature Sensor
Removing
‹› The Level Control Pump Temperature Sensor (G290) is installed on the air supply unit under the right front wheel housing liner.
-
Place vehicle on a hoist. Refer to => [ Positioning Vehicle on Hoist and Wheels ] See: Steering and Suspension/Suspension/Service and
Repair/Procedures/Positioning Vehicle on Hoist and Wheels.
-
Remove noise insulation..
-
Remove wheel.
-
Remove front wheel housing liner.
-
Unclip and disconnect connector - 2 -.
‹› The illustration shows the air supply unit removed.
-
Remove bolt - 1 - and remove Level Control Pump Temperature Sensor - 3 -.