A6 Quattro Sedan V6-3.2L (BKH) (2005)
/Page-4735002.png)
Installing
-
Coat O-rings - 4 - with supplied grease.
-
Install Level Control Pump Temperature Sensor - 3 - into housing - 2 - all the way.
-
Install bolt - 1 - and tighten to specified tightening specification. Refer to => [ Air Supply Unit and Solenoid Valve Block Assembly Overview ]
See: Suspension/Suspension Control ( Automatic - Electronic )/Compressor/Pump/Service and Repair/Removal and Replacement/Air Supply Unit
and Solenoid Valve Block Assembly Overview.
