A6 Quattro Sedan V6-3.2L (BKH) (2005)
Suspension Fluid Temperature Sensor: Service and Repair
Level Control Pump Temperature Sensor G290, removing and installing
Removing
Note: Level Control Pump Temperature Sensor G290 is installed on air supply unit under right front wheel housing liner.
-
Position vehicle on lifting platform.
-
Remove noise insulation.
-
Remove wheel.
-
Remove right rear wheel housing liner.
-
Unclip and disconnect harness connectors - 2 -.
Note: For the sake of illustration, air supply unit is depicted as removed.
-
Remove bolt - 1 - and pull out Level Control Pump Temperature Sensor - 3 -.
Installing