A6 Quattro Sedan V6-3.2L (BKH) (2005)
-
Pull out flange shaft oil seal.
-
Lubricate outer circumference of seal with gear oil.
-
Drive new seal in onto stop (take care to keep seal straight).
^
Installation position: the open side of the seal should face the transmission.
-
Pack space between sealing lip and dust lip half-full with sealing grease G 052 128 A1.
-
Install flange shaft (right-side).
-
Check oil level in final drive (front).
-
Deactivate jacking mode.