A6 Quattro Sedan V6-3.2L (BKH) (2005)
/Page-3692003.png)
‹› Cage must be installed laterally correct.
-
Press in opposing balls in sequence, during this, previous position of ball hub to ball cage and to joint body must be re-established.
-
Press grease into joint body.
Grease quantities and types for drive axle with outer CV joint 88 mm or 100 mm diameter => [ Grease quantity and type ] See: Service and
Repair/Removal and Replacement/Rear Suspension/Drive Axle with 88 mm Outer CV Joint and 108 mm Inner CV Joint Assembly Overview.
