A6 Quattro Sedan V6-3.2L (BKH) (2005)
‹› Remove the bolt - 4 - and remove panel sideways.
4 - Combination screw
‹› 7.5 Nm
5 - Countersunk screw
‹› 6 Nm
6 - Door window
Removal:
‹› Run door window down.
‹› Remove the bolts - 7 - and remove door windows from window regulator.
Installing:
‹› Insert window into window regulator.
‹› Screw bolts - 7 - lightly into window regulator, but do not tighten yet.
‹› Drive door window upward into window frame.
‹› Pull door window toward front into window guide on window frame at B-pillar and tighten bolts - 7 - to 4 Nm.
7 - Countersunk screw
‹› 4 Nm
8 - Window regulator
‹› Window frame removed together with window regulator from door. Refer to => [ Window Frame and Window Regulator ].
‹› Door window removed.
‹› To remove, unscrew countersunk screw - 5 - and remove window regulator from window frame.