A6 Quattro Sedan V6-3.2L (BKH) (2005)
Windshield Washer Reservoir: Service and Repair
Washer Fluid Reservoir Filler Neck
Washer Fluid Reservoir Filler Neck
Removing
-
Remove E-Box in left plenum chamber. Refer to => [ E-Box in left Plenum Chamber ] See: Power and Ground Distribution/Electrical Accessory
Panel/Service and Repair/E-Box in left Plenum Chamber.
-
Remove nuts - 3 - and - 4 - from filler neck - 2 -.
-
Pull sealing grommet - 1 - out of body cut-out.
-
Rotate filler hose for filler neck counter-clockwise - arrow A -.
-
Pull filler hose for filler neck out of washer fluid reservoir - arrow B -.
Installing
Install in reverse order of removal, observing the following:
-
Insert filler hose - 1 - for filler neck into washer fluid reservoir - 4 - - arrow 1 -.
-
Rotate filler hose for filler neck clockwise - arrow 2 -.
‹› Make sure O-ring - 3 - is not crimped when inserted.