A6 Quattro Sedan V8-4.2L (ART) (2000)
Antenna, Phone: Service and Repair
Retrofitting
NOTE: If retro fitting an antenna, always use genuine Audi parts to ensure ease of installation and optimum reception.
-
Use felt-tipped pen to mark position for antenna hole on left-rear side panel as shown.
a - 88 mm (3.46 in.)
b - 98 mm (3.85 in.)
c - 26 mm (1.02 in.)
-
Drill hole for antenna and carefully file down edges.
-
Use suction device to remove any loose metal particles and filings.
-
Touch up paint work around hole, applying anti-corrosion agent if necessary.
-
Install antenna.
-
Install and connect wiring.
NOTE: To avoid electrical interference, always make sure that the antenna is properly grounded.
-
Install toothed washer under Ground connection -1-.