A6 Quattro Sedan V8-4.2L (ART) (2000)
Air Door Actuator / Motor: Service and Repair
Defroster Flap Motor -V107-
Defroster Flap Motor -V107-, Removing And Installing
-
Remove glove box
-
Disconnect harness connector -A-.
-
Remove 3 bolts -B-.
-
Disengage actuating arm and remove positioning motor.
NOTE: The lever arm of the stepper motor installed on the version "2" air conditioning unit is different from the arm installed on version "1".
-
Remove bolts -C- (3x) and detach positioning motor -B- from bracket -D-.
Notes for installation:
-
After installing, always carry out On Board Diagnostic (OBD) of air conditioning system.
-
When installing the positioning motor, make sure that the actuator arm is properly engaged.
-
Install the wiring harness so that it cannot come in contact with any moving parts (e.g. the actuating arm on the positioning motor).