A6 Quattro Sedan V8-4.2L (ART) (2000)
High Pressure Sensor / Switch: Service and Repair
A/C Pressure Switch -F129-
Removing and installing
-
Remove front bumper
-
Disconnect harness connector.
-
Remove pressure switch -B-:
Tightening torque: 5 Nm.
-
O-Ring-seal -A- (10.8 mm x 1.8 mm).
NOTE:
-
With the switch removed bridge terminals 1 and 2 of connector -B- to check cooling performance.
-
The refrigerant circuit remains closed, connection with valve.