A6 Quattro Sedan V8-4.2L (ART) (2000)
/Page-10580002.png)
-
Allow brake pedal to return slowly to its normal position.
-
Both readouts should return from 1 to 0.
If one or both of the displays does not change from 0 to 1:
-
Check voltage supply.
Checking voltage supply
-
Remove storage compartment on driver's side.
-
Disconnect 4-pin harness connector on brake pedal.
-
Connect multimeter (voltage range) between the following sockets on the connector:
-
Switch ignition off.
4-pin connector on wiring
Specification
harness, socket
