A6 Quattro Sedan V8-4.2L (ART) (2000)
Test the following wiring connections for open circuits and short to B+ or Ground (GND).
6-pin connector on
VAG 1598/31
wiring harness, socket
test box socket
1
92
2
83
3
117
4
84
5
118
6
91
Resistance in wiring: max. 1.5 ohm
-
Correct any open/short circuit as necessary.
If no wiring malfunction is detected:
-
Replace throttle valve control module.
-
Display readiness code, Refer to "Monitors, Trips and/or Drive Cycle (Readiness Codes)/Displaying Readiness Code" See: Testing and Inspection
. Readiness code must be generated if DTC memory was erased, Refer to "Monitors, Trips and/or Drive Cycle (Readiness Codes)/Generating
Readiness Code" See: Testing and Inspection