A6 Quattro Sedan V8-4.2L (ART) (2000)
/Page-4355004.png)
-
Remove bolts -1- and -2- as well as nut -3- for fuel filler neck.
-
Swing fuel filler neck little toward front of vehicle.
CAUTION: DO NOT kink lines.
-
Disconnect vent lines -arrows- at back side of fuel filler neck.
-
Remove fuel filler neck together with expansion tank.
Installing
Installation is the reverse of removal, however note the following:
NOTE: Fasten all hose clamps with the same type of clamp that was used in production Parts catalog.
-
Check installation position of Ground connection while fuel tank and/or fuel filler neck is removed. If necessary unbolt expansion tank -1- -arrow-.
