A6 Quattro Sedan V8-4.2L (ART) (2000)
Seat Belt Tensioner: Service Precautions
Safety precautions for handling pyrotechnic belt tensioners
-
Testing, removing, installing and repair work must only be performed by qualified personnel.
-
When connecting the belt tensioner unit, all mechanical parts (including those of the 3-point seat belt) must be properly attached.
-
Other than the person performing the work, there should not be anyone in the vehicle.
-
Belt tensioner components must not be opened nor repaired; always use new parts.
-
Belt tensioner units which have been dropped from a height of more than 50 cm must not be installed in a vehicle.
-
Belt tensioner units which are mechanically damaged (dents, fractures) must be replaced.
-
The belt tensioner unit should be installed immediately after removing them from their packaging.
-
If the work is interrupted, the belt tensioner unit should again be placed in its packaging.
-
Never point open end of belt tensioner at another person.
-
Always wash hands after handling belt tensioners which have been triggered.
-
Observe all storage and transportation regulations for explosive substances.
-
It is not permitted to leave the belt tensioner unit unattended.
-
The belt tensioner unit must not be treated with grease, cleaning or similar substances, nor may it be exposed to temperatures above 100 Degree C
(212 Degree F), even for short periods.