A6 Quattro Sedan V8-4.2L (ART) (2000)
Steering Wheel: Reading and Clearing Diagnostic Trouble Codes
With Manufacturer Scan Tool
Check DTC Memory
NOTE: The displayed DTC in formation is updated only when initiating OBD or with "Erase DTC Memory" function 05.
-
Switch printer on via the PRINT button (indicator lamp in button lights up).
Indicated on display
Rapid data transfer
HELP
Select function XX
-
Press buttons -0- and -2-. This selects "Check DTC memory", function 02.
Indicated on display
Rapid data transfer
Q
02 - Check DTC Memory
-
Press -Q- button to confirm input.
The number of stored malfunctions appears in the display.
X DTC recognized
The stored malfunctions are displayed and printed out one after the other.
-
Check print-out against DTC table and repair all malfunctions as necessary. See: Powertrain Management/Computers and Control Systems/Testing
and Inspection/Diagnostic Trouble Code Tests and Associated Procedures/Manufacturer Code Charts/Multi-Function Steering Wheel
If "No DTC recognized!" is displayed, the program will return to "Select function XX" after the -> button is pressed.
No DTC recognized
->
Indicated on display
Rapid data transfer
HELP
Select function XX
-
End Output (function 06) See: Scan Tool Testing and Procedures/End Output (Function 06)
-
Switch off ignition and disconnect diagnostic connector.