A6 Quattro Sedan V8-4.2L (ART) (2000)
Shift Interlock Solenoid: Service and Repair
Shift Lock Solenoid Switch, removing and installing
Removing
^
Remove shift mechanism.
^
Remove stop buffer from cable lever.
^
Shift to Tiptronic position and remove frame.
^
Move selector lever to "2".
^
Disengage lever for lock cable by lifting it from its mounting and remove from mounting bracket.
^
Press out bolt for locking pawl using drift.
^
Remove shift lock solenoid switch together with locking pawl upward.
Installing
^
Move selector lever to "2".
^
Install shift lock solenoid switch together with locking pawl from above into mounting bracket.
^
Carefully drive in bolt for locking pawl.
^
Check engagement of locking pawl in "P" and "N" of selector lever using a screwdriver.
^
Insert locking pawl into mounting bracket and lock it by feel in both mountings.
Check locking function of locking pawl:
^
Locking pawl must engage in shift lever position "P" and must lock the selector lever.
^
Install frame on mounting bracket (ribbed side must face up) and install stop buffer in cable lever.
^
Install shift mechanism.