A6 Quattro Sedan V8-4.2L (ART) (2000)
/Page-4899001.png)
Fluid Line/Hose: Service and Repair
ATF Lines, Removing and Installing
ATF lines, removing and installing
Note: Observe the following:
^
Rules of cleanliness.
^
General repair instructions.
^
Lightly lubricate O- rings with Vaseline. Any other greases may lead to malfunctions in the hydraulic controls of the transmission.
^
Insert ATF lines in transmission or ATF cooler by hand completely to stop.
1. Bolt- 23 Nm (17 ft. lbs.)
2. Bolt- 5 Nm (44 inch lbs.)
3. Bolt- 5 Nm (44 inch lbs.)
4. Bolt- 65 Nm (48 ft. lbs.)
5. Bolt - 20 Nm (15 ft. lbs.)
6. ATF line from cooler
^
Observe label on transmission housing
7. ATF line to cooler
^
Observe label on transmission housing
8. O-ring
^
Always replace
