A6 Quattro Sedan V8-4.2L (ART) (2000)
Axle Shaft: Service and Repair
Servicing
Drive axle with constant velocity (CV) joint, servicing
Grease quantity and type
Note: The constant velocity joints are packed with grease G 000 603.
CAUTION: Part numbers are listed here for reference only.
1. Outer constant velocity joint
^
Replace as complete part only
^
Pressing off. Refer to Fig. 1
^
Installing: drive onto shaft to stop, using plastic hammer
2. Bolt for drive axle
^
Always replace
^
115 Nm (85 ft. lbs.) + 1/2-turn (180°)
WARNING: The vehicle must be standing on its wheels when loosening or tightening the bolt. Otherwise the risk of an accident exists.
3. Joint boot
^
Check for tears and chafing
4. Clamp
^
Always replace
5. Socket-head bolt M8 x 48
^
40 Nm (30 ft. lbs.)
6. Plate
7. Joint boot