A6 Quattro Sedan V8-4.2L (BVJ) (2007)
Police / Special Vehicle Options: Service and Repair
Special Purpose Vehicle Control Module
Removing
-
If control module is replaced, select "Guided Functions" of respective control module in.
-
Switch off ignition and remove ignition key.
-
Remove glove compartment. Refer to
-
Remove screws - arrows -.
-
Remove Special Purpose Vehicle Control Module (J608) - item 1 - from bracket.
-
Disconnect electrical connector - 2 -.
Installing
Install in reverse order of removal, observing the following:
-
Install glove compartment. Refer to
Tightening Specifications