A6 Quattro Sedan V8-4.2L (BVJ) (2007)
/Page-6989001.png)
Hood Shock / Support: Procedures
Gas-filled Strut, Venting
CAUTION:
Clamp only within this area, otherwise accident could occur.
Always wear eye protection when performing this procedure.
-
Clamp gas-filled strut in vice area x. Dimension of - x - = 50 mm (2 in.).
-
Using saw, cut into cylindrical part of strut at point within first third of cylinders length (measured from cover edge at piston rod end of cylinder).
