A6 Quattro Sedan V8-4.2L (BVJ) (2007)
Trim Panel: Service and Repair
Upper A-Pillar Trim, Removing and Installing
Upper A-pillar Trim, Removing And Installing
Special tools, testers and auxiliary items required
-
Trim removal wedge 3409
CAUTION: Observe safety precautions for work on side curtain airbag.
There are two versions of upper A-pillar trim fasteners.
The first version (approx. through introduction of Avant) is described first.
1
-
Upper A-pillar trim
-
Removal
-
Carefully pry upper A-pillar trim - 1 - up at side curtain airbag clip - 2 - clip with hook as far as stop using Trim Removal Wedge 3409.
-
Pry out clips - 4 - in center and lower area of upper A-pillar trim - 1 - using Trim Removal Wedge 3409.
-
Carefully slide upper A-pillar trim - 1 - upward (the side curtain airbag clip - 2 - is slid into keyhole-shaped opening) and remove upper