A6 Quattro Sedan V8-4.2L (BVJ) (2007)
Seat Heater: Service and Repair
Backrest Heating Element
Backrest Heating Element
Removing
-
Remove seat => [ Seat ] See: Service and Repair/Removal and Replacement/Bucket Seats.
-
Remove the backrest => [ Seat Pan ] See: Service and Repair/Removal and Replacement/Bucket Seats.
‹› Electrical wiring harness must not be loosened at seat pan.
‹› Set aside backrest toward rear on soft surface.
-
Remove backrest cover and upholstery => [ Backrest Cover and Upholstery ].
-
Cut out area - A - with electrical connection wire from old heating element.
-
Remove old electrical connection wire.
-
Disconnect electrical wire connections to heating elements at backrest bolsters at positions - B -.
-
Disconnect electrical connection wires to upper backrest heating element at positions - C -.
Installing
-
Align new heating element on backrest surface, remove protective foil and glue new heating element to same positions as old heating elements.
-
Route connecting wires to backrest bolsters through openings in seat cushion without crossing.