A6 Quattro Sedan V8-4.2L (BVJ) (2007)
/Page-7524001.png)
Seat Heater: Service and Repair
Seat Heating Element
Seat Heating Element
‹› Removing
-
Remove seat => [ Standard Front Seat ] See: Service and Repair/Removal and Replacement/Standard Front Seats.
-
Remove seat pan cover => [ Seat Pan Cover and Upholstery, Standard Seat ].
-
Cut wire - 2 - off of old heating element - 1 -.
‹› Installing
-
Align heating element - 1 - on seat surface, remove protective foil and glue heating element to cushion.
-
Insert electrical wire - 2 - into the gap - 3 -.
-
Route connecting wires at locations - 4 - in bottom of gaps, avoiding crossover.