A6 Quattro Sedan V8-4.2L (BVJ) (2007)
-
Use trim removal wedge 3409 for this.
Note:
^
When removing, make sure that surface of cylinder is not damaged.
Installing
-
Insert seal
-
Use trim removal wedge 3409 for this.
-
Place protective cap with outer sealing lip on piston.
-
The surface of piston and seal must only be cleaned with mineral spirits and then dried.
-
Thinly coat piston and seal with assembly paste G 052 150 A2 before inserting.
-
Using trim removal wedge 3409, insert inner sealing lip into cylinder groove.