A6 Quattro Sedan V8-4.2L (BVJ) (2007)
‹› It must be bled on each bleeder screw.
3
Bolts
‹› 196 Nm
‹› always use new bolts
4
Bracket
‹› for the brake line
5
Brake line connection to brake caliper
‹› 19 Nm
6
Bolts
‹› for the brake line bracket
‹› 10 Nm
7
Brake disc C/SiC
‹› for allocation and wear limit, refer to => [ Brakes System ] See: Specifications/Brakes System
‹› Wear characteristics, refer to=> [ Ceramic Brake Disc Connectors ] See: Disc Brake System/Description and Operation
‹› Removing and Installing, refer to=> [ Front Ceramic Brake Disc, C/SiC Caliper ] See: Front Ceramic Brake Disc, C/SiC Caliper
8
Bolt
‹› 10 Nm
9
Seal
10
Seal
11
Brake piston
12
Brake pad wear wire
‹› on the left and right brake calipers
‹› on the inside of each brake pad
13
Brake pads
‹› With the brake pad wear wire on the inside of the brake pad
‹› Make sure that it is installed in the correct position
‹› For allocation and wear limit, refer to => [ Brakes System ] See: Specifications/Brakes System
‹› Removing and installing, refer to => [ Front Brake Pads, Ceramic Brakes ] See: Disc Brake System/Brake Pad/Service and Repair/Removal
and Replacement/Front Brake Pads, Ceramic Brakes
14
Securing clip
‹› Secure each pin with a locking clip.
15
Pin for the brake pad spring
‹› Make sure that it is installed in the correct position