A6 Quattro Sedan V8-4.2L (BVJ) (2007)
/Page-2293006.png)
-
Pivot radiator forward, pull up and remove.
Installing
‹› Tightening Specifications => [ Radiator and Coolant Fan Assembly Overview ] See: Radiator and Coolant Fan Assembly Overview.
Installation is in reverse order of removal, note the following:
‹› Secure all hose connections using hose clamps appropriate for the model type.
-
Install ATF lines.
-
Install signal horn bracket.
-
Install front bumper.
-
Fill with coolant => [ Filling ] See: Service and Repair/Procedures.
‹› Complete coolant must be replaced if the radiator was replaced.
-
Check ATF level.
