A6 Quattro Sedan V8-4.2L (BVJ) (2007)
-
Drive in sealing ring for power-steering pump drive using thrust piece (T40052).
-
Insert drive shaft - arrow - for oil pump into guide on oil pump.
‹› To guarantee that the drive shaft engages correctly in oil pump, insert drive shaft only into oil pump, do not install together with front bearing cap.
-
Cut off nozzle on tube of sealant at front mark (dia. of nozzle approx. 1.5 mm).
-
Apply sealant beads - arrows - to clean sealing surfaces of spur gear unit as shown in illustration.