A6 Quattro Sedan V8-4.2L (BVJ) (2007)
-
Tighten bolts => [ Timing chain lower cover tightening sequence ] See: Timing Chain Covers Assembly Overview.
The rest of installation is in reverse order of removal, note the following:
-
Install crankshaft seal, transmission side => [ Crankshaft Sealing Ring, Transmission Side, Replacing ] See: Seals and Gaskets/Crankshaft Main
Bearing Seal/Service and Repair/Crankshaft Sealing Ring, Transmission Side, Replacing.
-
Install oil filter housing => [ Oil Filter Housing ] See: Engine Lubrication/Oil Filter Housing/Service and Repair/Oil Filter Housing.
-
Install intake manifold.
-
Install left and right timing chain covers => [ Installing ] See: Timing Chain Covers.
-
Install drive plate => [ Drive Plate ] See: Transmission and Drivetrain/Flex Plate/Service and Repair/Drive Plate.
-
Install automatic transmission.
-
Add engine oil and check oil level => [ Engine Oil Level, Checking ] See: Engine Lubrication/Testing and Inspection.