A6 Quattro Sedan V8-4.2L (BVJ) (2007)
/Page-8468001.png)
Turn Signal Bulb: Service and Repair
Light Bulb For Turn Signal, Replacing
Light Bulb For Turn Signal, Replacing
Removing
-
Pry off cap - 1 - in front wheel house liner in - direction of arrow -.
NOTE: On vehicles without cap, the wheel house liner must be loosened in front area.
-
Turn bulb socket counter-clockwise - arrow - and remove from housing.
-
Release securing clip in - direction of arrow - and pull light bulb - 1 - out of socket - 2 -.
Installing
Installation is performed in reverse order of removal, noting the following:
-
Insert new bulb into housing, do not touch glass cone with bare hands.
-
Push cap into wheel house liner until it engages noticeably.
