A6 Quattro Sedan V8-4.2L (BVJ) (2007)
-
Install new hex bolts - 5 - and - 8 - in succession and tighten => [ (Item 12) Bolt ] See: Steering and Suspension/Suspension/Stabilizer Bar/Service
and Repair/Removal and Replacement/Front Suspension/Subframe, Engine Mount Bracket, Stabilizer Bar, Crossmember, Coupling Rod Assembly
Overview.
-
Install new hex bolts - 1 -, - 2 -, - 3 - and - 4 - in succession and tighten => [ (Item 29) Bolt ] See: Steering and Suspension/Suspension/Stabilizer
Bar/Service and Repair/Removal and Replacement/Front Suspension/Subframe, Engine Mount Bracket, Stabilizer Bar, Crossmember, Coupling
Rod Assembly Overview.
-
Tighten hex bolts - 9 -, - 10 -, - 11 - and - 12 - => [ (Item 9) Bolt ] See: Steering and Suspension/Suspension/Stabilizer Bar/Service and
Repair/Removal and Replacement/Front Suspension/Subframe, Engine Mount Bracket, Stabilizer Bar, Crossmember, Coupling Rod Assembly
Overview.
-
Check camber value once more. Refer to => [ Wheel Alignment Specified Values ] See: Specifications.
-
Install noise insulation..
CAUTION!
Every time camber is corrected, axle alignment values should be checked.