A6 Quattro Sedan V8-4.2L (BVJ) (2007)
/Page-1778002.png)
-
Unfasten quick-release catches - 2 - and detach rear noise insulation.
Draining ATF
-
Place drip tray for workshop hoist VAS 6208 under transmission.
-
Remove ATF drain plug - arrow A -.
-
Drain ATF.
Note:
^
Observe relevant disposal regulations.
^
The engine must not be started and vehicle must not be towed without ATF in transmission.
^
The drain plug with seal must be replaced.
-
Tighten new drain plug - arrow A - to 12 Nm.
Filling transmission with ATF
-
Remove ATF inspection plug - arrow B
-
Guide ATF charging device V.A.G 1924 filler nozzle in from below through an opening in deflector cap - arrow -, taking care not to push
deflector cap upward out of position.
-
Fill with ATF using ATF charging device V.A.G 1924 until ATF comes out of inspection hole.
