A6 Quattro Sedan V8-4.2L (BVJ) (2007)
Fuse Block: Service and Repair
Left Instrument Panel Fuse Holder
Left Instrument Panel Fuse Holder
Removing
-
With ignition switched off, disconnect battery Ground (GND) wire. Refer to => [ Battery, Disconnecting and Connecting ] See: Starting and
Charging/Battery/Service and Repair/Battery.
-
Remove lower instrument panel cover on driver's side.
-
Remove bolt - 1 -.
-
Loosen bolt - 3 - two rotations.
-
Slide fuse panel - 2 - in - direction of arrow - off of central tube for instrument panel.
-
Cut cable tie - 1 -.
-
Release cover for fuse panel - arrows -.
-
Remove fuses on fuse panel.
-
Pull off retaining strip for harness connectors - arrows - and remove harness connectors from fuse panel.