A6 Quattro Sedan V8-4.2L (BVJ) (2007)
Note:
^
Ignore - 2 and 3 -.
^
To improve clarity, the removed engine is shown from the rear.
-
Remove vacuum hose - 2 - from T-piece on bulkhead.
Note:
^
Ignore - 1 -.
-
Remove crankcase ventilation hose - 1 and 2 -.
-
Remove bolts - 3 and 5 - and press crankcase ventilation pressure regulator valve from throttle valve connections.
-
Remove oil drain hose - arrow -.
Note:
^
Ignore - 4 - and 3094.
^
To improve clarity, the removed engine is shown from the rear.
-
Remove coolant hose - 2 - to intake manifold.
-
Free up engine wiring harness on rear coolant pipe.
-
Disconnect electrical connector - 3 - on Engine Coolant Temperature (ECT) Sensor G62.
-
Remove nuts - 5 -.
-
Remove engine wiring harness bracket from rear coolant pipe.
-
Remove bolts - 1 and 4 -.
-
Remove rear coolant pipe from right coolant pipe - arrow -.
-
Remove rear coolant pipe to right side of vehicle.