A6 Quattro Sedan V8-4.2L (BVJ) (2007)
Fuse Block: Service and Repair
Base Mount with Right Instrument Panel Fuse Panel
Base Mount with Right Instrument Panel Fuse Panel
Removing
-
With ignition switched off, disconnect battery Ground (GND) wire. Refer to => [ Battery, Disconnecting and Connecting ] See: Starting and
Charging/Battery/Service and Repair/Battery.
-
Remove glove compartment.
-
Release retaining springs - arrows - and press fuse panels - 1 - and - 2 - toward rear out of base mount.
-
Remove bolts - 1 - and - 2 -.
-
Remove base mount in - direction of arrow - from central tube for instrument panel.
Installing
Install in reverse order of removal, observing the following:
-
Install glove compartment.
-
Connect battery. Required actions => [ ] See: Starting and Charging/Battery/Service and Repair/Battery.
Tightening Specifications