audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Accelerator Pedal Module With Throttle Position (TP) Sensors, Removing and Installing|Page 8055 > < Accelerator Pedal Module With Throttle Position (TP) Sensors, Removing and Installing
Page 1
background image

Throttle Position Sensor: Service and Repair
Adapting Kick-Down Function After Replacing Throttle Position Sensor or Engine Control Module

Adapting Kick-down Function After Replacing Throttle Position Sensor Or Engine Control Module

NOTE:  If the throttle position sensor or engine control module is replaced in vehicles with automatic transmission, the kick-down function must be
adapted.

Special tools, testers and auxiliary items required

-

Vehicle diagnostic, testing, and information system VAS 5051 (VAS 5051 B version shown as example only)

Work procedure

-

Vehicle Diagnosis, Testing and Information System VAS 5051 connected with Diagnostic Cable VAS 5051 /5A , Vehicle Self-Diagnosis selected.

-

No faults in DTC memory.

-

Engine not running, ignition switched on.

Display on VAS 5051 : 

-

Tap "On Board Diagnostic" in selection -1 - and activate by tapping -> button.

Accelerator Pedal Module With Throttle Position (TP) Sensors, Removing and Installing|Page 8055 > < Accelerator Pedal Module With Throttle Position (TP) Sensors, Removing and Installing