A6 Quattro Sedan V8-4.2L (BVJ) (2007)
/Page-3145003.png)
CAUTION!
Danger due to escaping fuel.
‹› To prevent large quantities of fuel from escaping when removing fuel level sensor 2, fuel tank may only be a maximum of 1/4 full.
-
Remove the left union nut with the (T40068 A) - arrow -.
‹› The plastic catch on the threaded ring breaks off when the union nut is loosened.
-
Carefully pull the fuel level sensor 2 - 1 - and suction jet pump - 2 - partially out of the fuel tank opening.
‹› When removing, be sure not to bend floater arm of fuel level sensor 2.
-
Unclip the suction jet pump from the locking flange.
